This almost for sure. Especially since you had just pulled it apart. Did you pull and re-install the sensor or leave it in the whole time? Easy enough to pull and take a look at it.Originally Posted by nubcake
This almost for sure. Especially since you had just pulled it apart. Did you pull and re-install the sensor or leave it in the whole time? Easy enough to pull and take a look at it.
2003 White RS6 2013 Midnight Blue S5
2013 Daytona RS5 2x944 Turbo's 1974 911 w/'91 3.6ltr motor
Roy, WA
I left the sensor in the bell housing the whole time. I just checked and it is connected so I'm not convinced about that. Is there a block I can monitor to see if it is OK or not?
Going through the coding in VCDS:
17-Instruments -> Adaptation -> Ch 60 is set to 1025 (+0001 Engine & +1024 Instrument Cluster)
01-Engine -> Coding -> set to 0006752 but I think it should be 006712. I get an Out of Range error when I try that.
03-ABS Brakes -> Login: 07197 (6mt code doesn't work)-> Coding is set to 06697 but should be 06695. I cannot get this to change, probably because I can't clear the Missing Message from TCU error because. Guessing I can't clear this until I can get the Engine coding changed?
I have the TCU removed fyiy.
Last edited by NerdyDeeds; May 3rd, 2022 at 03:10.
Posting Permissions
Reply With Quote